Salt Spreaders

Salt Spreaders for Sale in Medina Ohio

SaltDogg Salt Spreaders

WALK BEHIND SPREADER 100B

• One-piece fully-welded steel frame.
• Large 1.5 cu. ft. polymer hopper.
• Cap.: 100 lbs. of bagged salt, sand, or other free flowing materials.
• Large 13" pneumatic tires.
• Large flow regulator offers ease of operation.
• Solid control linkage eliminates sticking and stretched cables.
• 3-flap adjustable poly deflector controls spread pattern (ideal for sidewalks, near sensitive foliage, etc.).
• Additional fixed rear deflector protects operator's feet.
• Expanded metal hopper screen helps prevent material jamming.
• Includes a durable, double-stitched plastic rain cover to protect from moisture and spillage.
• Heavy-duty stainless steel gears for added strength.

WALK BEHIND SPREADER 200B

• One-piece fully-welded stainless steel frame.
• Large 1.5 cu. ft. polymer hopper.
• Cap.: 100 lbs. of bagged salt, sand, or other free flowing materials.
• Large 13" pneumatic tires.
• Large flow regulator offers ease of operation.
• Solid control linkage eliminates sticking and stretched cables.
• 3-flap adjustable poly deflector controls spread pattern (ideal for sidewalks, near sensitive foliage, etc.).
• Additional fixed rear deflector protects operator's feet.
• Expanded metal hopper screen helps prevent material jamming.
• Includes a durable, double-stitched plastic rain cover to protect from moisture and spillage.
• Heavy-duty stainless steel gears for added strength.

WALK BEHIND SPREADER 400

• Drop spreader is ideal for sidewalks and areas near sensitive foliage.
• Wide spread path drops material only where it's needed.
• 90% assembled.
• 2.5 cu. ft. heavy duty poly hopper provides durability and low maintenance.
• Cap.: 200 lbs bagged salt, sand, or other free flowing material.
• Black powder coated handles with grips.
• Stainless steel main frame and discharge assembly.
• Stainless steel auger and shaft assembly.
• Nylon bushings for smooth action.
• Large 13" pneumatic tires.
• Adjustable discharge.
• Solid control linkage for discharge adjustment.
• Metal screen to prevent material jamming.
• Includes a durable, double-stitched plastic rain cover to protect from moisture and spillage.
• Individually boxed for retail display.

TAILGATE SPREADER 01B

This commercial grade salt spreader is the most cost-effective commercial grade spreader to maintain large commercial grounds.

• Attractive and rugged black polymer hopper & orange powder coated steel mounting frame resist rust and corrosion.
• Material flow and spread width ranges from 3 to 30 feet and are controlled from an in-cab electronic spreader control panel.
• The ultra-smooth hopper interior, in addition to the auger design, provide for easy material flow and reduced material "bridging".

TAILGATE SPREADER 05B

This commercial grade salt spreader features a low-profile design for unrestricted rear view and a protected internal motor assembly.

• Attractive and rugged black polymer hopper & orange powder coated steel mounting frame resist rust and corrosion.
• Heavy-duty 12-volt spreader motor is housed in a sealed motor chamber that is located inside the hopper for extra protection.
• Material flow and spread width ranges from 3 to 30 feet and are controlled from an in-cab electronic spreader control panel.
• The ultra-smooth hopper interior, in addition to the auger design, provide for easy material flow and reduced material "bridging".

ELECTRIC HOPPER SPREADER SHPE1500 

Ideal for medium and heavy duty commercial applications.

• General –The SHPE series electric polymer SaltDogg spreaders are completely self-contained, ultra-durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on pickup, dump and platform trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
• MATERIAL HOPPER – Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hopper makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.
• AUGER – Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
• MATERIAL FLOW/OUTPUT – Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute. Spread width is variable from 5 to 38 feet.
• SPINNER CHUTE ASSEMBLY – An 11.5″ polymer disc with four fins is connected to a 3/4″ diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5′ to 38′. A convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.
• ELECTRIC MOTORS – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50° to -105° C). An in-cab console features independent controls for the auger, spinner and vibrator.
• STANDARD EQUIPMENT – 1/4″ black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Spreader hold-down kit.
• SHPE1500 & SHPE1500X: Overall Length, 92″ (requires 77″ minimum bed length. Fits all 8′ beds and most standard 6′ beds); Capacity Struck, 1.45 cu. yd.; Width, 50.5″; Height, 37.5″; Recommended use, 3/4 or 1-Ton trucks.

ELECTRIC HOPPER SPREADER SHPE2000

Ideal for medium and heavy duty commercial applications.

• General –The SHPE2000 series electric polymer Salt Dogg spreaders are completely self-contained, ultra-durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on pickup, dump and platform trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
• MATERIAL HOPPER – Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hopper makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.
• AUGER – Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
• MATERIAL FLOW/OUTPUT – Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute. Spread width is variable from 5 to 38 feet.
• SPINNER CHUTE ASSEMBLY – An 11.5″ polymer disc with four fins is connected to a 3/4″ diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5′ to 38′. A convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.
• ELECTRIC MOTORS – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50° to -105° C). An in-cab console features independent controls for the auger, spinner and vibrator.
• STANDARD EQUIPMENT – 1/4″ black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Spreader hold-down kit.
• SHPE2000 & SHPE2000X: Overall Length, 96″ (requires 77″ minimum bed length. Fits all 8′ beds and most standard 6′ beds); Capacity Struck, 2.00 cu. yd.; Width, 47.5″; Height, 40″; Recommended use, 3/4 or 1-Ton trucks above 8,500 lbs. GVWR.

ELECTRIC HOPPER SPREADER SHPE2250

• Material Hopper – Rotationally molded double-wall polymer unibody spreader with smooth angled walls help maximize material flow. Features 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hoppers makes for easy one man installation& removal, requires extended fork, or lift from 4-point tie downs.
• Auger – 5.25" large diameter variable pitch auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
• Material Flow/Output – Salt, 3.2 cu. ft./minute; Salt/Sand, 2.3 cu. ft./minute. Spread width is variable from 5 to 30 feet.
• Spinner Chute Assembly – A 14" polymer disc is connected to a 3/4" diameter stainless steel shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty adjustable polymer chute and spinner assembly with an external shield, 2 adjustable side baffles. Separate chute mount converts chute into standard or extended length chute. A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage.
• Electric Motors – Two ultra-quiet 12-volt DC direct-drive motors, (.75 HP Auger Motor, .5 HP Spinner Motor), power the auger and spinner, and are encased in a heavy-duty poly housing along with vibrator. The wiring harness is constructed of 8-gauge automotive wire. An in-cab console features independent controls for the auger, spinner and vibrator.
• Standard Equipment – 1/4" black powder coated steel top screen. Stainless steel inverted V. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 200 force pounds for maximum performance. Spreader hold-down kit.

UNDER TAILGATE SPREADER 92440SSA

• Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty housing. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50°C to -105°C). An in-cab console features independent controls for the auger and spinner.
• Under tailgate mounting allows normal use of dump body without interference from spreader.
• Rugged 7-gauge trough has 3-point hinged bottom cover that provides easy access to entire auger assembly for easy, one-person cleanout.
• Spreads from 4' to 25' of rock salt, free-flowing granular materials or chemicals. 
• Auger is supported by 1-1/4" steel shaft ends and has right and left flighting to the discharge port delivering a continuous, consistent flow of spreading material.
• Sealed, self-aligning 1-1/4" diameter radial bearings with grease fittings.
• Spreader assemblies come with material trough, auger assembly, spinner and auger motors, spinner assembly, 14" polyurethane spinner and mounting plates.
• Includes stainless steel mounting brackets.
• Poly adapter for auger motor improves serviceability.

UNDER TAILGATE SPREADER 92420SSA

Heavy duty commercial and municipal applications

• Available in orange powder coated carbon steel or stainless steel models.
• Direct drive operation reduces numbers of moving parts, assuring dependable service.
• Under tailgate mounting allows normal use of dump body without interference from spreader.
• Rugged 7-gauge trough has 3-point hinged bottom cover that provides easy access to entire auger assembly for easy, one-person clean out.
• Spreads from 4′ to 40′ of rock salt, free-flowing granular materials or chemicals.
• Auger is supported by 1-1/4″steel shaft ends and has right and left flighting to the discharge port delivering a continuous, consistent flow of spreading material.
• Sealed, self-aligning 1-1/4″diameter radial bearings with grease fittings.
• Low-speed, high-torque orbital motors
• Spreader assemblies come with material trough, auger assembly, spinner and auger motors, spinner assembly, polyurethane spinner and mounting plates
• Hydraulic safety lockout system

Meyer Salt Spreaders

MEYER HOTSHOT SALT SPREADER

A Spreader For All Seasons

If you are looking for a heavy-duty broadcast spreader for all-season use, look no further. Meyer Hotshots are compact, easy to maneuver and built to handle the extreme conditions of year-round use.

Hotshots are designed to apply a variety of materials including top-dress sand, rock salt, ice melt, limestone and fertilizer. Maximum spread range is from 12- to 18-feet, depending on the model. For spreading in confined areas, Hotshots are equipped with an easy-to-remove deflector shield that prevents the material from flying too far.

A custom-fit, see-through cover keeps the weather out and the material in.

MEYER 240 SALT SPREADER

Compact Spreader for Light Vehicles

The Meyer 240 is easy-to-use and perfect for small- to medium-sized jobs like walkways and long driveways. It easily attaches to any vehicle with a 2-inch receiver hitch and is especially appropriate for SUVs, light pick-up trucks, tractors and utility vehicles.

The Meyer 240 will spread bagged rock salt up to 25 feet and its two-speed, in-cab controller is reliable and easy to use. In case you back into something, an integrated motor guard protects the 1/8 h.p. electric motor and serves as a storage stand when the spreader is not in use.

MEYER BLASTER SALT SPREADER

A funny thing happens to equipment with moving parts in cold, icy weather. It slows down, breaks down, or in some way, lets you down. Take for instance stubborn chunks of fused rock salt or debris that jam the drive system of most tailgate spreaders. That’s one jam session that won’t happen with Meyer® Blaster™ spreaders because Blasters have the most powerful spreader motor available. The Blaster’s unique ½ horsepower, direct-drive motor is rated at up to 70 amps of surge power to grind through those annoying chunks of salt or sand. And the direct-drive system applies the torque directly to the auger.

Your basic Blasters come in 350- and 750-pound capacities. But if you need to throw sand, or a blend of salt and sand, you need the “S” versions. The 350S and 750S models come ready to spread a 50/50 blend of dry, free-flowing, #1 rock salt and sand; or sand only. If you want to add sand-spreading capabilities to a standard 350 or 750, you can also purchase a Vibrator Kit that converts a basic Blaster into an “S” model.