Chucks Custom Truck and Trailer

Phone: 330-723-6029 Toll Free: 877-723-6029 Fax: 330-723-8508
Specializing in Truck, Trailer and equipment sales,parts and service.
  • Home
  • About
    • Contact
  • Trailers
    • Trailer Hitches
    • Trailer Parts
    • Trailer Inventory
  • Truck Accessories
  • Snow and Ice Control
  • Service
  • Custom U-bolts

Snow and Ice Control

We are a large warehouse distributor for snowplows and salt spreaders. We keep a comprehensive parts inventory for multiple brands of equipment, both original and after market.

Our highly trained service staff is fully equipped and ready to install, service and repair fix your snow and ice removal equipment. Each and every year, our staff attends manufacturer workshops - to keep their skills sharp and your equipment running at peak performance. Our parts department is very knowledgeable, with over 30 years experience in the snow and ice industry.

——————————————————————————————————————————————-

CURRENT PRESEASON SPECIALS:

Meyer Products  Xpress mount commercial grade snowplows

***************************** $1000 off last years prices  ************************

************************** $500 down no payments until October ****************

7′6″ plow installed $3395

8′ plow installed $3495

8′6″ plow installed $3595

9′ plow installed $3695

(less $300 for cash and carry units)

 

 

—————————————————————————————————————————————————————————————————-

 Used Meyer 7′6″ STP Standard Poly

$1800 cash and carry (Includes plow assembly, mount for 1999-2006 GM 2500/2500hd, and touchpad

$2300 installed complete on 1999-2006 GM 2500/2500hd

$2450 installed on any other 1/2 , 3/4 ton truck

 

 

 

 

 

 

 

 

 

 

 

 

—————————————————————————————————————————-

 

 

 

 

 

#SHPE1500 BUYERS SALTDOGG 1.5 CU. YARD ELECTRIC POLY HOPPER SPREADER

$2995.00

LIMITED QUANTITIES

IDEAL FOR MEDIUM AND HEAVY DUTY COMMERCIAL APPLICATIONS.
General –The SHPE series electric polymer Salt Dogg spreaders are completely self-contained, ultra-durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on pickup, dump and platform trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
MATERIAL HOPPER – Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hopper makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.
AUGER – Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
MATERIAL FLOW/OUTPUT – Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute. Spread width is variable from 5 to 38 feet.
SPINNER CHUTE ASSEMBLY – An 11.5″ polymer disc with four fins is connected to a 3/4″ diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5′ to 38′. A convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.
ELECTRIC MOTORS – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50° to -105° C). An in-cab console features independent controls for the auger, spinner and vibrator.
STANDARD EQUIPMENT – 1/4″ black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Spreader hold-down kit.
SHPE1500 & SHPE1500X: Overall Length, 92″ (requires 77″ minimum bed length. Fits all 8′ beds and most standard 6′ beds); Capacity Struck, 1.45 cu. yd.; Width, 50.5″; Height, 37.5″; Recommended use, 3/4 or 1-Ton trucks.

—————————————————————————————————————————————-

#SHPE2000 BUYERS SALT DOGG 2.0 CU. YARD 96″ ELECTRIC POLY HOPPER SPREADER

$3295.00

LIMITED QUANTITIES

Buyers Poly Hopper Spreader — 1.5 Cubic Yard Capacity, Model# SHPE1500 | Buy now for just $3399.99!

IDEAL FOR MEDIUM AND HEAVY DUTY COMMERCIAL APPLICATIONS.
General –The SHPE2000 series electric polymer Salt Dogg spreaders are completely self-contained, ultra-durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on pickup, dump and platform trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.
MATERIAL HOPPER – Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. Molded fork slots in hopper makes for easy one man installation and removal; requires extended forks, or lift either series with 4-point tie downs.
AUGER – Screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
MATERIAL FLOW/OUTPUT – Salt, 2.2 cu. ft. / minute; Salt-Sand, 1.3 cu. ft. / minute. Spread width is variable from 5 to 38 feet.
SPINNER CHUTE ASSEMBLY – An 11.5″ polymer disc with four fins is connected to a 3/4″ diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty poly chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the rear and under carriage of the vehicle, and allows for complete directional spread control and full or compact spread. Total spread path ranges from 5′ to 38′. A convenient spring-latch locking mechanism allows the spinner assembly to be easily removed for cleaning/storage.
ELECTRIC MOTORS – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with non-combustible sheathing (-50° to -105° C). An in-cab console features independent controls for the auger, spinner and vibrator.
STANDARD EQUIPMENT – 1/4″ black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Spreader hold-down kit.
SHPE2000 & SHPE2000X: Overall Length, 96″ (requires 77″ minimum bed length. Fits all 8′ beds and most standard 6′ beds); Capacity Struck, 2.00 cu. yd.; Width, 47.5″; Height, 40″; Recommended use, 3/4 or 1-Ton trucks above 8,500 lbs. GVWR.

———————————————————————————————————————————————————–

#TGS06 BUYERS SALTDOGG TAILGATE SPREADER

$895.00

TGS06
Dimensions: 45″ H x 52″ W x 27″ D
• Rotationally molded double-wall construction requires no welded steel framework.
• Heavy-duty 12-volt spreader motor is housed in a sealed motor chamber inside the hopper for extra protection.
• Concealed 80 lb. vibrator.
• Mount directly to 2″ hitch receiver or to bumper (includes universal stake pocket attachment and mounting hardware).
• Forward pivoting non-removable lid with self-latching handle.
• Molded-in hopper handles.
• Easy to assemble.
• Easy to use flow-gate design.
• Material flow & spread width, from 3′ to 30′ controlled from an in-cab electronic spreader control panel.
• Easy maintenance (motor replacement).
• Capacity: 10 cu. ft. #1 rock salt or similar material.
• Lighter weight unit for higher load capacity.

—————————————————————————————————————————————————————————————————–

#92420SSA  BUYERS SALTDOGG 96″ 304 STAINLESS STEEL UNDERTAILGATE SPREADER W/HYD. LOCKOUT

$2295.00

LIMITED QUANTITIES

HEAVY DUTY COMMERCIAL AND MUNICIPAL APPLICATIONS.
• Available in orange powder coated carbon steel or stainless steel models.
• Direct drive operation reduces numbers of moving parts,assuring dependable service.
• Under tailgate mounting allows normal use of dump body without interference from spreader.
• Rugged 7-gauge trough has 3-point hinged bottom cover that provides easy access to entire auger assembly for easy,one-person cleanout.
• Spreads from 4′ to 40′ of rock salt, free-flowing granular materials or chemicals.
• Auger is supported by 1-1/4″steel shaft ends and has right and left flighting to the discharge port delivering a continuous,consistent flow of spreading material.
• Sealed,self-aligning 1-1/4″diameter radial bearings with grease fittings.
• Low-speed,high-torque orbital motors
• Spreader assemblies come with material trough, auger assembly, spinner and auger motors, spinner assembly, polyurethane spinner and mounting plates
• Hydraulic safety lockout system

———————————————————————————————————————

#SP8000 SNOWEX VEE PRO 8000 1.5 CU. YARD POLY ELECTRIC HOPPER SREADER

$2995.00

FEATURES & BENEFITS:
ELECTRICAL

Speed Control – Dual independent auger/spinner speed and flow control system LED display with digital system status and circuit protection.
Wiring Harness – Constructed with GXL high-temperature 10-gauge automotive wire with non-combustible sheathing.

 

CONSTRUCTION
Frame – Unitized heavy-duty steel construction.
Hopper – One-piece LLDPE safety yellow poly with integral vertical rib.
Motors – Dual, 12-volt DC sealed direct drive motors.
Spinner Drive – Compact independent weather-tight unit, with maximum speed 8:1 gear reduction transmission.
Auger – Unique maximum-torque transmission with 20:1 gear reduction. Unidirectional welded steel flighting.
Finish – All metal parts powder-coated with 3 mil. epoxy. UV stabilized industrial grade material.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Navigation

  • Home
  • About
    • Contact
  • Trailers
    • Trailer Hitches
    • Trailer Inventory
    • Trailer Parts
  • Truck Accessories
  • Snow and Ice Control
  • Service
  • Custom U-bolts
Copyright © 2008 Chucks Custom and Moth Systems LLC